Car Brite Black Pearl SiO2 Ceramic Coating Kit
Car Brite Black Pearl Ceramic SiO2 Coating provides a lasting, impermeable barrier that protects surfaces against the harshest of elements while providing a deep, rich gloss. The Si02 formula is a liquid glass coating resistant to scratches, acid, salt, chloride and alkaline making it far more durable than wax. The coating provides a near perfect surface creating a self-cleaning finish that helps prevent water spots and the adhesion of deposits while enhancing color and depth of shine. Plus, its anti-static properties help repel dust helping keep surfaces cleaner - longer.
Key Benefits
- Liquid glass 9H protection
- 10x harder than today's painted finishes
- Lasts up to 5 years
- Helps keep your vehicle cleaner - longer
- Anti-static formula helps repel dust
- Helps prevent scratches
- Fills small scratches and swirl marks
Characteristics
- Function: Impermeable coating for painted and glass surfaces
- Surfaces: Paint, Glass & Chrome
- Formulation: Silicon Dioxide
- Color: Clear
- Fragrance: Unscented
- Solvent Based: Yes
- Ready-to-Use: Yes
Specifications
- Solvent Based, Yes
- Ready-to-Use, Yes
Directions for Use
- Do not apply in direct sunlight. Application should be done in a well-lit area.
- Car Brite recommends using multiple colored microfiber towels for this process to avoid risk of contamination or damage.
- Your choice of color for compound & polish
- We recommend white for the removal of silicone prior to the application as it will reveal any areas needing cleaning attention
- A dedicated color for buffing the ceramic. This cloth must be disposed of after application is complete as tiny glass particles could cause scratching.
- The first step with any ceramic coating is to prepare the surface by removing any scratches and surface contaminants.
- After washing the vehicle, inspect for scratches and surface contaminants. Surface contaminants can be felt by gently wiping a piece of plastic film over the surface.
- Remove scratches with Car Brite SELECT Painted Surface Care or Trilogy compounds and polishes.
- Remove surface contaminants with a Car Brite Surface Prep Mitt or clay bar.
- Next, remove any wax, silicone or grease using isopropyl alcohol over entire surface to be coated.
- Apply a small amount to the applicator block and apply to vehicle surface using a cross-hatch pattern to ensure adequate coverage. Make your initial application to a 2’ x 2’ area to understand dry time that typically takes 1-3 minutes. It’s important to keep the work area manageable and not allowing the product to completely dry on the surface.
- When product begins to haze and feels tacky, wipe with black cloth. This helps to spread product evenly while removing excess.
- Immediately buff area with a clean microfiber towel to a lustrous sine.
- Then, continue this process until entire vehicle has been coated.
- After washing the vehicle, inspect for scratches and surface contaminants. Surface contaminants can be felt by gently wiping a piece of plastic film over the surface.